氣力輸送系統主要由四部分組成：動力源、供料裝置、輸送裝置、分離裝置，每個部分都需要專用硬件設備來實現所需的要求。進行一次完整的氣力輸送，需要依次完成：動力源提供壓縮氣流—供料器供給物料顆粒—輸送裝置完成管道運輸與分流—分離裝置將物料顆粒與氣流分離。

　　The pneumatic conveying system mainly consists of four parts: power source, feeding device, conveying device, and separation device, each of which requires dedicated hardware equipment to achieve the required requirements. To carry out a complete pneumatic conveying, it is necessary to complete the following steps in sequence: the power source provides compressed air flow, the feeder supplies material particles, the conveying device completes pipeline transportation and diversion, and the separation device separates material particles from the air flow.

　　動力源是氣力輸送系統中必不可少的元件，包括各種類型的壓縮機、鼓風機、風扇和真空泵等。在氣力輸送系統設計時，需要確定實現可靠輸送所需的氣流和壓力（正壓或負壓）。

　　The power source is an essential component in pneumatic conveying systems, including various types of compressors, blowers, fans, and vacuum pumps. When designing a pneumatic conveying system, it is necessary to determine the airflow and pressure (positive or negative) required to achieve reliable conveying.

　　在供料裝置，根據物料顆粒運動在不同區域內變化規律的不同，可以將供料裝置內部區域劃分為混合區、加速區、穩定輸送區。在混合區，固體顆粒被引入流動的氣流中。由于固體進入流場時基本上處于靜止狀態，因此當固體與流動的氣體混合時會發生較大的動量變化，這種勢能變化是加速區的主要特征。加速區通常由一段一定長度的水平管道組成，被設計用于加速固體顆粒到某種“穩定”流動狀態。

　　In the feeding device, the internal area of the feeding device can be divided into a mixing zone, an acceleration zone, and a stable conveying zone based on the different patterns of material particle movement in different regions. In the mixing zone, solid particles are introduced into the flowing airflow. Due to the fact that solids enter the flow field in a basically static state, significant momentum changes occur when they mix with flowing gases, and this potential energy change is the main characteristic of the acceleration zone. The acceleration zone is usually composed of a horizontal pipeline of a certain length, designed to accelerate solid particles to a certain "stable" flow state.

　　在氣固分離裝置內，物料顆粒從氣流中分離出來。分離工作主要借助特定的氣固分離系統完成，選擇合適的氣固分離系統取決于許多因素，其中最重要的是固體顆粒的大小。根據固體顆粒特性的不同，可以使用許多不同配置的氣固分離系統分離物料。旋風分離器以其幾何簡單、分離效果好、維護方便和價格低廉的優點，在工業中廣泛用于從氣體中分離灰塵或用于產品回收。

　　In the gas-solid separation device, material particles are separated from the gas flow. The separation work is mainly accomplished through specific gas-solid separation systems, and the selection of a suitable gas-solid separation system depends on many factors, among which the most important is the size of solid particles. According to the different characteristics of solid particles, many different configurations of gas-solid separation systems can be used to separate materials. Cyclone separators are widely used in industry for separating dust from gases or for product recycling due to their advantages of simple geometry, good separation efficiency, easy maintenance, and low cost.

　　本文由氣力輸送系統友情奉獻.更多有關的知識請點擊:http://www.liujianlin.cn/我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message